GDA2020 places Australia about 1.5 to 1.8 metres north-east of where GDA94 has it, because the continent has moved since 1994. To use an older point cloud with GDA2020 data, every point has to be converted, not just relabelled. Load the file, say it is in GDA94, and convert it to the GDA2020 system of the same zone.
Convert the file
- Open the LAS and LAZ Check and drop the LAS or LAZ file onto the page.
- Under "The points are in", choose the GDA94 system, for example GDA94 / MGA zone 56. If the file already says so, it is filled in.
- Under "Heights measured from", choose what the heights are: AHD, or ellipsoid height.
- Choose "Convert the points".
- Under "Convert to", choose the GDA2020 system of the same zone, for example GDA2020 / MGA zone 56. The tool suggests it.
- Leave the heights as "Unchanged" to keep them as they are, or choose another height system.
- Press "Save the fixed file".
The new file holds the converted points and says GDA2020. Your original file is not changed. How to fix the coordinate system of a point cloud covers files that name no system at all.
How the points are moved
| Step | What happens |
|---|---|
| Position | A 7-parameter conversion (EPSG:8048), the one PROJ uses by default |
| AHD heights | Kept as they are: AHD is the same in GDA94 and GDA2020 |
| Ellipsoid heights | Moved by the same conversion: GDA2020 heights are about 9 cm lower |
| New precision | Millimetres, or a ten-millionth of a degree for degrees |
Tested against PROJ on points across Australia, the converted positions agree to within a millimetre.
Heights at the same time
A conversion can also change the heights, for example from GDA94 ellipsoid heights to AHD. The tool goes through GDA2020 and AUSGeoid2020, Geoscience Australia's model that links GDA2020 ellipsoid heights to AHD. Ellipsoid and orthometric height explains the two kinds of height.
Good to know
- GDA94 itself has small distortions. ICSM publishes a grid that models them. Where centimetres matter for survey control, compare against the grid or your control marks.
- WGS 84 and GDA2020 are taken as the same, as PROJ does. They agreed in 2020 and drift apart by about 7 cm a year.
- A file in MGA94 zone 55 goes to MGA2020 zone 55. The zone does not change.
Questions
Is GDA2020 the same as MGA2020?
GDA2020 is the datum, and MGA2020 is its map grid in metres. Each MGA2020 zone is a projected system of GDA2020, as each MGA94 zone is of GDA94.
Why not just change the label?
The numbers would stay where GDA94 put them, about 1.5 to 1.8 m from where GDA2020 puts the same ground. The file would line up with nothing in GDA2020.
Can I convert back from GDA2020 to GDA94?
Yes. Set "The points are in" to the GDA2020 system and convert to the GDA94 system. The same conversion is used in reverse.
Do I need to do this for a new drone survey?
Only if it was processed in GDA94. Most current processing software can work in GDA2020 directly. The LAS and LAZ guide covers which file to keep.