Guides
Drone altitude
Open the Drone Altitude FixerWhy Is the Altitude Wrong in My DJI Photos?
Why the altitude stored in DJI drone photos is often tens of metres out, how to check your own photos, and when it matters.
How to Fix DJI Photo Altitude Before Mapping
Two ways to correct wrong altitude in DJI drone photos before processing: inside Pix4D or Metashape, or in the photos themselves.
DJI Altitude Fields Explained
GPS Altitude, Absolute Altitude and Relative Altitude in DJI photos: what each one means, which to trust, and which your mapping software reads.
Heights and datums
Open the Height Datum ConverterHow to Convert Drone Photo Heights to Sea Level
Convert the ellipsoid heights in RTK drone photos to sea-level heights with a geoid model, for a whole flight, before you process them.
Ellipsoid vs Orthometric Height Explained
The difference between ellipsoid height and orthometric (sea-level) height, what a geoid model is, and which one your drone and your survey use.
Why Is My Drone Map at the Wrong Height?
A drone map that sits tens of metres too high or too low usually has ellipsoid and sea-level heights mixed. How to tell, and how to fix it.
Drone flight checks
Open the Drone Flight CheckHow to Check Drone Photos Before Processing
Check a drone flight for missing photos, gaps, low overlap, blurred photos and mixed camera settings before you leave the site or start processing.
Why Are Photos Missing from My Drone Flight?
The usual reasons a drone skips photos during a mapping flight, how to tell which one it was, and how much overlap is left at each gap.
How Much Overlap Do Drone Mapping Photos Need?
The overlap that mapping software asks for, how overlap turns into the distance between photos, and how to check the overlap of a flight afterwards.
Photo GPS
Open the Photo GPS ExtractorHow to Extract GPS Coordinates from Photos
How to get the GPS coordinates out of a photo: from one photo on a phone or computer, or from a whole folder at once into a spreadsheet.
How to View Geotagged Photos on a Map
Three ways to see where your photos were taken on a map: in the browser, in Google Earth, and in the photo app you already use.
Alternatives to ExifTool
Eight alternatives to ExifTool compared: what each one is good for, and which to pick for viewing metadata, editing it, or getting GPS data out of photos.
Photos in Google Earth
Open the Photos to KMLHow to Put Geotagged Photos into Google Earth
Turn a folder of geotagged photos into one Google Earth file, with a placemark and the picture where each photo was taken.
KML vs KMZ: What Is the Difference?
KML is a text file of places. KMZ is the same file zipped, with room for pictures inside. When to use each, and how to turn one into the other.
Why Don't My Photos Show Up in Google Earth?
The usual reasons photos are missing or blank in Google Earth: no location in the photo, pictures left out of the file, or a format that cannot be shown.
Photos by area
Open the Select Photos by AreaHow to Select Photos by Location on a Map
Pick out the photos taken inside an area: draw it on a map or load a boundary file, then download the photos or a list of them.
How to Split a Large Drone Photo Set by Area
Split a large set of drone photos into blocks by area on a map, with enough margin that each block still processes well on its own.
How to Draw a KML Boundary in Google Earth
Draw a site boundary as a polygon in Google Earth Pro, save it as a KML file and use it to select the photos taken inside it.
Geotagging photos
Open the Batch Geotag PhotosHow to Geotag Photos with a GPX Track
Add GPS locations to photos from a camera with no GPS, using a GPX track recorded on a phone, watch or GPS unit at the same time.
How to Add a GPS Location to Photos
Add a GPS location to photos from a camera without GPS: one spot for a whole set, picked on a map or typed in as coordinates.
Why Are My Geotagged Photos in the Wrong Place?
Photos geotagged from a GPS track that land in the wrong place usually have a time problem. How to find it and put it right.
Frames from video
Open the Video to Geotagged FramesHow to Get Geotagged Photos from Drone Video
Save frames from a DJI drone video as JPG photos with the GPS position of each frame, using the .SRT file the drone records beside the video.
What Is a DJI SRT File?
A DJI .SRT file is a small text file saved beside a drone video. It records the position, height and camera settings for each moment of the video.
Can You Make a Map from Drone Video?
Drone video can be turned into a map or 3D model by saving evenly spaced frames with GPS. What works, what to expect, and how to fly for it.
Point clouds
Open the LAS and LAZ CheckHow to Fix the Coordinate System of a Point Cloud
A LAS or LAZ file with no coordinate system, or the wrong one, lands in the wrong place in GIS software. Check the file, then set or convert the system.
Convert a Point Cloud from GDA94 to GDA2020
Move every point of a LAS or LAZ file from GDA94 to GDA2020, and from MGA94 to MGA2020 zones, with the same conversion PROJ uses, and keep AHD heights.
LAS vs LAZ: What Is the Difference?
LAS is the standard file for lidar and drone point clouds. LAZ holds the same points, packed to a fraction of the size without losing any detail.
Coordinates
Open the Coordinate ConverterHow to Convert MGRS Coordinates
Convert MGRS to latitude and longitude or UTM, and back. Paste one grid reference or a whole list, and learn how to read an MGRS code.
UTM vs MGRS: What Is the Difference?
UTM and MGRS describe the same grid in two ways. How each is written, how to read one from the other, and when to use which.
Convert Latitude and Longitude: DD, DMS, UTM
Convert between decimal degrees, degrees minutes seconds and UTM. One coordinate or a whole list, with the working shown for doing it by hand.