Free tool
Drone Flight Check
Check the photos from a drone flight before you leave the site or start processing: missing photos, gaps, overlap, blurred photos and mixed camera settings. Your photos are read on your device and never uploaded.
Filled markers are the photos to look at. Each rectangle is the ground one photo covers. Map background from OpenStreetMap. Your photos are not sent anywhere.
| Photo | From previous (m) | Altitude (m) | Overlap (%) | Notes |
|---|
How to use it
- 1Add the photos from one flightDrop the JPG files onto the page, choose them, or choose the folder. Use the files straight from the drone.
- 2Read the resultThe result lists missing files, gaps, height changes, mixed camera settings and the estimated overlap. The map shows each photo and the ground it covers.
- 3Check the pictures and download the reportPress "Check sharpness and exposure" to mark blurred, dark and bright photos. The report is a CSV file with one line for each photo.
Missing files
Drones number their photos in order. A jump in the numbering means a file was not saved or not copied from the card. The check names the files that are missing.
Gaps
The tool measures the distance from each photo to the next. A step much longer than the usual spacing along a flight line means the drone missed a photo there. The longer step between two flight lines is not counted.
Height
Most mapping flights are flown at one height. A photo well above or below the rest was usually taken during take-off, landing or a test shot, and is best left out of processing.
Overlap
From the lens, the picture size and the height, the tool works out the ground each photo covers and how much neighbouring photos share. It assumes flat ground and a camera pointing straight down, so the figures are estimates.
Sharpness and exposure
The tool compares each picture with the photos taken just before and after it, which show much of the same ground. A photo with much less detail than its neighbours, or much darker or brighter than them and the rest of the flight, is marked. Where neighbours cannot be matched, the photo is compared with the whole flight. Look at a marked photo before you leave it out.
Camera settings
Mapping software works best when every photo comes from one camera, one lens, one picture size and one dewarp setting. Dewarp is the DJI setting that corrects lens distortion in the picture. A flight that mixes settings is marked.
Wrong altitude in the photos?
DJI photos often carry an altitude that is wrong for mapping. The Drone Altitude Fixer corrects it for the whole flight.
Questions
Can I use it in the field?
Yes. Copy the photos from the card to a laptop and open the page. The check itself needs no connection once the page is open. Only the map background does.
How is the overlap worked out?
From the lens and picture size each photo records, the height above the take-off point and the distance between photos. It assumes flat ground and a camera pointing straight down, so it is an estimate. Type the height above ground if the site is not level with the take-off point.
How does it find blurred photos?
It compares the detail in each picture with the photos taken just before and after it, which show much of the same ground. A photo with much less detail than its neighbours is marked. Where neighbours cannot be matched, the photo is compared with the whole flight. Look at a marked photo before you leave it out.
What is dewarp?
A DJI camera setting that corrects lens distortion in the picture. Mapping software expects one setting for the whole flight, so a mix of on and off is marked.
Which photos does it work with?
JPG files with a GPS position, as saved by DJI and most other drones. DNG raw files are not supported.
Guides for this tool
More tools for drone photos
Other tools
All drone photo tools See all 10 tools
All ten tools are free to use. No account is needed.