Free tool
LAS and LAZ Check
Check a LAS or LAZ point cloud for problems, and set or convert its coordinate system: MGA, UTM, GDA94 to GDA2020, AHD heights. Your file is read on your device and never uploaded.
No file loaded.
Map background from OpenStreetMap. The outline and dots show where the points fall. Your file is not sent anywhere.
How to use it
- 1Add your LAS or LAZ fileDrop the point cloud onto the page or choose it. Every point is read and checked on your device.
- 2Read the reportSee what the file says about itself, what the points show, and any problem, from a missing coordinate system to repeated points.
- 3Fix the coordinate systemWrite the right system into the file, or convert every point to another one, such as GDA94 to GDA2020 or ellipsoid heights to AHD. Save it as LAS or LAZ.
What is checked
The header against the points: the count, the area and the returns. The coordinate system, and whether the coordinates fit it. Then the points themselves: classes, noise, repeated points, GPS time, colour and the precision they are stored at.
Set or convert
A file from drone software often has the right coordinates but no record of the system, so GIS programs place it wrongly or not at all. Setting the system fixes that without touching a point. Converting moves the points, for example from GDA94 to GDA2020.
Heights
Drone and LiDAR heights are usually above the ellipsoid. In Australia, plans and levels use AHD, which differs from the ellipsoid by tens of metres. The tool converts with AUSGeoid2020 for AHD, and with EGM2008 or EGM96 for worldwide sea level.
Convert one position
Check a single point between degrees, UTM and MGRS before you convert a whole file.
Questions
Which files does it read?
LAS 1.0 to 1.4, all point formats 0 to 10, and LAZ files from current LASzip, PDAL and drone software. Very old LAZ files (LASzip 1) are not read.
Which coordinate systems can it set or convert?
WGS 84, GDA94 and GDA2020 in degrees, every MGA zone of GDA94 and GDA2020, and every WGS 84 UTM zone. Heights can be ellipsoid, AHD, EGM2008 or EGM96.
What is the difference between setting and converting?
Setting writes the name of the system into the file and leaves the points as they are. Use it when the points are right but the file does not say so. Converting moves every point into another system.
How exact is a conversion?
GDA94 to GDA2020 uses the same 7-parameter conversion as PROJ, and heights use the AUSGeoid2020, EGM2008 or EGM96 grids. Tested against PROJ, positions agree to within 1 mm and heights to within 5 mm.
Is there a size limit?
The file is read in parts, so large files work. In Chrome and Edge the fixed file is written straight to disk. Other browsers build it in memory first, which suits files up to about 1 GB.
Guides for this tool
Other tools
All 3D and point cloud tools See all 10 tools
All ten tools are free to use. No account is needed.