Tool
Drone Altitude Fixer
Correct the altitude recorded in DJI photos, for a whole flight at once. Your photos are processed on your device and never uploaded.
| Photo | Recorded | Above take-off | Corrected | Status |
|---|
How to use it
- 1Add the photos from one flightDrop the JPG files onto the page or choose them. Use the files straight from the drone.
- 2Enter the ground height at take-offType the true height above sea level of the take-off point, or choose a fixed offset. The table shows the corrected altitude for every photo.
- 3Correct and downloadYou get corrected copies in one download. Your original files are not changed.
Why the altitude is often wrong
Many DJI drones work out height from air pressure, measured from the take-off point. The altitude written into the photo can then be far from the true height above sea level.
Why it matters
Mapping software reads that value. A wrong altitude can put your model, contours and measurements at the wrong height.
What this tool does
It rewrites the altitude in every photo using the ground height you enter, so the whole flight lines up before processing. It works on JPG files that already contain an altitude value.
Questions
Does it change my original photos?
No. The tool makes corrected copies and leaves your original files as they are.
Which values does it change?
The GPS altitude in each photo and, if you keep the box ticked, the DJI altitude field that mapping software reads. The height above take-off and the picture itself are not changed.
Which photos does it work with?
JPG files that already contain an altitude value. The ground height method needs the height above take-off that DJI drones record. DNG raw files are not supported.
Guides for this tool
More tools for drone photos
Other tools
All drone photo tools See all 10 tools
All ten tools are free to use. No account is needed.