A DJI photo stores its altitude in three fields, and they do not mean the same thing. Knowing which is which tells you what your mapping software is reading and what to correct.
The three fields
| Field | Where it is stored | What it means |
|---|---|---|
| GPS Altitude | The standard photo data (EXIF) | The drone's figure for height above sea level. This is what Windows shows in a photo's properties. |
| Absolute Altitude | DJI's own data block (XMP) | The same figure, in DJI's own field. |
| Relative Altitude | DJI's own data block (XMP) | Height above the take-off point. |
Agisoft describes it this way: DJI writes Absolute Altitude and Relative Altitude to its own data block, and writes the Absolute Altitude value into the standard field as well.
Which one can you trust?
On a drone without RTK, Relative Altitude is usually the sound one. It comes from the barometer, which measures the climb from take-off well.
The other two try to state a height above sea level. That needs the height of the take-off point, which the drone only estimates. Firmware faults add to the problem. Pix4D staff found one flight at 50 metres stored with an Absolute Altitude of +1.20.
The two sea-level fields normally agree with each other. When they do not, as in that case, software can read the wrong one without telling you.
Which field does your software read?
| Software | What its maker says |
|---|---|
| PIX4Dmapper | For DJI drones it reads Absolute Altitude from DJI's data block, not the standard field |
| Agisoft Metashape | It loads the altitude from the photo as it is, with no correction |
For other software, check its documentation. If you cannot find out, correct both sea-level fields so it does not matter which one is read.
What to correct
The true altitude of a photo is the ground height at take-off plus its Relative Altitude. A correct photo has that value in both GPS Altitude and Absolute Altitude.
The Drone Altitude Fixer works this out for every photo in a flight. It rewrites GPS Altitude and Absolute Altitude and leaves Relative Altitude as it is. See How to Fix DJI Photo Altitude Before Mapping for the steps.
Questions
How do I see these fields in my own photos?
The Drone Altitude Fixer shows the recorded altitude and the height above take-off for each photo you drop in. Windows shows GPS Altitude only, under Properties, Details. ExifTool, a free command-line program, lists all three.
What about RTK drones?
RTK drones record a far more precise height, and their photos carry extra accuracy fields. The problems described here concern drones without RTK.
Why is my altitude wrong in the first place?
See Why Is the Altitude Wrong in My DJI Photos?
Sources
- Working with DJI photos altitude problem, Agisoft, last changed February 2026
- Correct altitude in image metadata, incorrectly read by Pix4D Mapper, Pix4D community, 2020