Drone surveys often end in AutoCAD or Civil 3D, where the orthomosaic sits under the design. Large orthomosaics from Pix4D and Metashape often fail to load with a message that the file is not valid. The usual cause is the file format, not the image.
Why AutoCAD refuses the file
- Orthomosaics over 4 GB are written as BigTIFF, which AutoCAD does not read.
- Some versions also fail on TIFFs with JPEG compression inside.
- Even a readable file can be too large to attach comfortably: Civil 3D slows down with very big images.
Plain JPG tiles avoid all three. Each tile is an ordinary picture, and a small world file (.jgw) next to it holds its position and pixel size.
Make tiles for AutoCAD
- Open Orthomosaic Compressor and drop the orthomosaic .tif.
- Under "Save as", choose "JPG tiles for AutoCAD".
- Choose a tile size. 4,000 pixels suits most drawings; 2,000 keeps each file small.
- Lower the resolution if the drawing does not need full detail.
- Press "Save the JPG tiles" and choose an empty folder. Each tile gets a .jpg and a .jgw file; tiles that would be fully transparent are left out.
Insert the tiles
- Civil 3D and AutoCAD Map 3D: set the drawing's coordinate system to that of the orthomosaic, then use MAPIINSERT and choose the JPG tiles. The world files place them.
- Plain AutoCAD: IMAGEATTACH does not read world files. A free routine such as GeoRefImg places an image from its world file.
The tiles are in the coordinate system of the orthomosaic, such as MGA zone 50. If the drawing uses another one, the tiles will be far away from the design. Transparent edges turn white in the JPG tiles.
For GIS software a compressed GeoTIFF is the better choice: see how to compress an orthomosaic. If the problem is only size, an orthomosaic too large to open lists the options.
Questions
Have the tiles been tested in AutoCAD?
The tiles and world files were checked in GDAL, which QGIS uses, and land exactly in place. They follow the standard world file layout that AutoCAD Map 3D reads, but they have not been tested in AutoCAD itself.
Why are the edges white?
JPG files cannot be transparent. Areas outside the orthomosaic are filled with white.
Can I load only some tiles?
Yes. Each tile is placed on its own, so insert only the ones over your site.